.

INTRODUCTION:

All our graphic come complete with "Transfer Paper" ( like masking tape ) and is the transfer devise    for your graphics.

We recommend using the Tape Registration method ( shown below ) and not any kind of Hinge method.

Installation temperature is best at 70 degrees. Never in the sun. In winter conditions protect from freezing for 72 hours.

The Do's Of Installing

Before installation clean graphic areas with rubbing alcohol (isopropyl alcohol) but Zyolene is best.

Take Your Time. Any Air That Can't Be Removed Will Dissipate Within A Few Days.

Get Help With Larger Graphics. If You Need A Installer Use Someone With Experience.

We Recommend Body Shops, Vinyl Graphic Company, or Window Tint Company.

Mainly Body Shops Are Recommended. They Know How To Prepare A Painted Surface Best.

Always Install In A Cool Temperature (about 70 to 72 degrees) In A Closed Clean Enviroment.

Never Squeegee Directly on the Graphic without the transfer tape or something else like the vinyl graphic backing /slick side up. You Could Damage The Clear Laminate.

Wait 72 Hours Before Washing. No Waxing Can Be Done On Graphics For 14 Days.

Test your polish on the iHotRod.com stickers that we send with every purchase.

Care Information

Do not wash or get wet for 72 hours after installation.  After 72 hours of cure time, washing with mild soap and water can be done. Again never go against the flame tips, go with them. Waxing is possible on graphics after 14 days of cure time.

Wet Application Recipe

In an 8 ounce Spray Bottle:

8 ounces of water

1 drop - liquid hand soap ( it's milder than dish soap )

1/2 teaspoon - Isopropyl Alcohol ( rubbing alcohol )